Specifications

20. Position the POINT of the HOOK directly behind the SCARF of the needle. Leave
a THREAD distance between the POINT of the hook and the needle.
21. Tighten the colored hook screw and check that the setting is correct as shown in
Figures 3-40 and 3-41.
22. Press the key to rotate the the hook to access the other two hook screws
and tighten them securely.
UTC Adjustments
22. Refer to the UTC and Needle Depth adjustments on Pages 3-38 through 3-41.
23. After setting the UTC adjustments replace the needle plate, both rotary hook
covers, and the bobbin case; and return the machine to its operational state.
3 - 44 Rotary Hook
EMT 10T Technical Manual Melco Embroidery Systems