Specifications

Various Technical Specifications
The following is a list of various tension and force specification for the EMT 10T (All
specifications to be within plus or minus 10% unless otherwise indicated):
X Drive Belt Tension. . . 25 lbs. measured on top portion with carriage to left side
Y Drive Belt Tensions . . . . . 40 lbs. measured on top portion with beam full back
Y Motor Belt Tension. . . . . . . . . . . . . . . . . . . . . 40 lbs. pushing down on motor
Z Motor Belt Tension. . . . . . . . 7 pounds (+/- 1) measured on one portion of belt
Color Change Motor Belt Tension . . . . . . 6 lbs. measured on top portion of belt
X Carriage Friction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 +/- 2 pounds
Y Beam Friction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 +/- 4 pounds
NOTE: A special force gauge has been designed for adjusting the belt tensions using
unique methods that are representative of these tension specifications.
The following lists the X and Y home positions attained when the "Set Home"
function is initiated on the EMT 10T embroidery peripheral.
X Home . . . . . . . . . . centered within +/- 0.015 inches
Y Home . . . . . . . . . . carriage mounting holes positioned 7.09 +/- 0.015 inches
relative to needle plate hole
1 - 8 Various Technical Specifications
EMT 10T Technical Manual Melco Embroidery Systems