Specifications

7. Hold the needle case securely with one hand while you remove the 4 socket head
cap screws that secure the needle case to the bearing retainer plate assembly
near the top of the needle case (see Figure 3-28).
bearing retainer
plate assembly
(left side)
embroidery
head v-rail
(left end)
clamping
devices on
ends of v-rail
upper needle
case cover screws
tensioner
support
bracket
Figure 3 - 27
Needle Case
Needle Case Lower Rail
Retainer Plate Assembly
socket
head
cap
screws
(4 each)
Lower Rail Retainer (on
embroidery head arm)
Sensor Interrupter Blade
2 screws holding
sensor interrupter
blade
Figure 3 - 28
3 - 30 Needle Case
EMT 10/4T Technical Manual Melco Embroidery Systems