Specifications

Color Change Motor Replacement

To remove the color change motor refer to the following steps:

1. Remove the color change area covers and tensioner covers as previously

described (see Figure 3-19).

2. Remove the color change PCB as described in the procedure just previous to this

procedure.

3. Remove the harness connection from the color change motor encoder (see

Figure 3-21).

4. Loosen and remove the 4 color change motor mounting screws (see Figure 3-21).

5. When the motor is loose, pull off the drive belt.

6. Loosen the pulley set screws and remove the motor drive pulley (see Figure 3-21).

4 motor

mounting screws

motor

encoder

(see below

for harness

connection)

pulley set

screws (2 ea)

motor drive

pulley

drive

belt

color

change

motor

orientation of

encoder harness

connector according

to wire locations

black

red

white

Figure 3 - 21

Color Change Motor Replacement 3 - 23

110279-01, Rev B 3. Embroidery Head Maintenance