Manualshelf

Specifications

ManualsBrandsMelco ManualsBusiness equipmentEMT 10/4T
21222324252627282930
16. Reconnect the X motor drive harness and encoder harness into their respective
mating connectors on the X beam PCB.
17. Carefully tuck the two X motor harnesses between the motor and X beam PCB
and reconnect the X beam PCB cover.
18. Refer to the following motor belt adjustment procedure to adjust the X motor
belt to the proper tension.
Adjustment
. . . TBD.
TBD = To Be Determined (not available at this time)
2 - 12 X Beam Assembly
EMT 10/4T Technical Manual Melco Embroidery Systems