Specifications

Display Screen Intensity
1. Turn OFF the power switch to the EMT 10/4T.
2. Refer to the removal
procedures earlier in this
chapter and remove the
tensioner covers if not
already removed.
3. Turn ON the power switch
to the EMT 10/4T.
4. Locate the intensity
adjustment knob on the
top, rear of the
keyboard/display printed
circuit board as shown in
Figure 2-4.
5. When facing the machine
from the front, rotate the
adjustment potentiometer clockwise to decrease intensity on the display, or
counterclockwise to increase the intensity on the display.
6. Reinstall the tensioner covers.
standoff
(1 of 4)
Keyboard
Assembly
attaching
nuts (4 ea)
Keyboard
Cover
Figure 2 - 3
intensity
adjustment
knob
Figure 2 - 4
Display Screen Intensity 2 - 5
110279-01, Rev B 2. Service Maintenance (except head and trimmer)