Specifications

Various Technical Specifications
The following is a list of various tension and force specifications for the EMT 10/4T
(All specifications to be within plus or minus 10% unless otherwise indicated):
X Drive Belt Tension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 pounds
X Motor Belt Tension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 pounds
Y Drive Belt Tensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 pounds
Y Motor Belt Tension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 pounds
Z Motor Belt Tension. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 pounds
Color Change Motor Belt Tension . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 pounds
X Carriage Friction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 +/- 2 pounds
Y Beam Friction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 +/- 5 pounds
NOTE: A special force gauge has been designed for adjusting the belt tensions using
specific procedures that are representative of these tension specifications.
These procedures are found in the associated sections in this manual.
The following lists the X and Y home positions attained when the "Set Home"
function is initiated on the EMT 10/4T Embroidery Peripheral.
X Home . . . . . . . . . . centered within +/- 0.015 inches
Y Home . . . . . . . . . . hoop bracket mounting hole center lines are 7.09 +/- 0.015
inches behind the center line of the needle plate hole
1 - 8 Various Technical Specifications
EMT 10/4T Technical Manual Melco Embroidery Systems