Specifications

Electrical Grounding
WARNING! It is very important that the power cord be plugged
into a properly wired electrical outlet. Failure to have a
properly wired outlet may result in damage to the equipment
and injury to personnel. It is recommended that a licensed
electrician be consulted to assure that the electrical outlet is
properly wired and grounded.
CAUTION! If a properly wired electrical outlet is not used for the source supply
voltage to the System, electrical failures may result.
Physical/Functional Arrangement
The EMT 10/4T may be divided into several distinctive physical and/or functional
areas as shown in Figure 1-1.
One of these sections is where the keyboard is located. This area is appropriately
called the keyboard section and is located between the tensioner assemblies of the
middle two heads (#2 and #3).
Beam
Section
Keyboard
Section
Embroidery
Head Section
(head #1)
Under Table
Section
E-Stop, Stop,
Start Section
(right)
E-Stop, Stop,
Start Section
(left)
Embroidery
Head Section
(head #4)
Figure 1 - 1
1 - 4 Physical/Functional Arrangement
EMT 10/4T Technical Manual Melco Embroidery Systems