Specifications

2. Loosen the thread break brush bracket mounting screws at the top of the head
(see Figure 2-26).
3. Position the thread break brush so it is centered directly under the selected
needle thread break contact post coming from the thread tensioner assembly
PCB.
4. Tighten the thread break brush bracket mounting screws securely.
Thread
Break Brush
Thread Break
Contact Post
Thread Break
Brush Bracket
Mounting Screws
Thread Break
Brush Bracket
Figure 2 - 26
Thread Break Brush Adjustment 2 - 29
110305-01, Rev A 2. Service Adjustments