Specifications

7. Locate the +5 volt adjustment potentiometer on the 500 watt power supply,

directly above the DC connector block when viewed from the front of the

machine through the two heads (see the illustration in Figure 2-10).

8. Using the alignment tool, adjust the potentiometer to +5 volts +/- 0.05 (between

+4.95 and +5.05 volts).

NOTE: The +24 volt power supply is not adjustable. Should the voltage become

out of the specified range on the previous page, it may be necessary to

replace the power supply.

+5 volt adjustment

potentiometer

connector

block

POWER SUPPLY

(Front View)

connector

block

Figure 2 - 10

Power Supply +5 Volt Adjustment 2 - 11

110305-01, Rev A 2. Service Adjustments