Specifications

Physical/Functional Arrangement
The EMC 10/4 may be divided into several distinct physical and/or functional areas
of description (see Figure 1-1). All the computerized controls are housed under the
rear covers between the far left (#4) embroidery head and the second embroidery
head from the left (#3). This area is called the Controller Section.
The power supply is located in the area under the rear cover between the far right
(#1) embroidery head and the second embroidery head from the right (#2).
The keyboard is located between the tensioner assemblies of the middle two heads
(#2 and #3).
Another area, the Carriage Section, consists of the mechanical devices that hold the
garments and move them forward and backward (y beam) and left to right (x
carriage). The x carriage and y beam assembly is located just above the table top
and positioned under the embroidery head arms. The carriage section also consists
of the drive belts, pulleys, and shafts associated with the device, and the carriage
centering mechanics and electronics. The motors that drive the carriage are a
functional part of the carriage section but are physically located under the carriage,
in the frame of the peripheral called the Under Carriage Section.
Controller
Section
(under rear
cover #4)
Carriage
Section
Keyboard
Section
Embroidery
Head
Section
(head #1)
Under
Carriage
Section
Figure 1 - 1
1 - 4 System Overview
EMC 10/4 Technical Manual Melco Embroidery Systems