User manual

23
After turning on the unit, it will show the startup
picture, press RETURN to access to Built-in
memory interface.
It supports SD/SDHC/MS/MMC and USB 2.0.
After inserting a card or USB device, slideshow
will play automatically, then press RETURN to
access to photo, music, video, le, calendar
and setup interface. Press OK to conrm.
3. Getting Started
3.1 Extend the digital photo frame bracket on the back of the frame to the widest position
for greatest stability, and then plug one end of the included AC adapter into a standard
110-240V AC electrical outlet and the other end into the right side the frame.
Note: There are different positions for the digital photo frame stand.
Please refer to “Stand Instruction”.
3.2 Remove the protective lm covering the LCD.
3.3 Remove the plastic battery insulator from the battery compartment and make sure
the remote control has a battery inside. Please refer to “Installing & Replacing Battery” if
you need a new battery.
3.4 Power on the unit by pressing the Power button on the remote control.
4. Operating Instruction
4.1Card and USB
Note: 1) Make sure there are supported picture, music and video les in the Card or USB device.
2) If there are supported picture and music les in the Card or USB Device, slideshow will play
automatically with background music.
