Installation Instructions

4. Linkable Channels Setting
This setting has 4 channels. As long as you choose “linkable”
security light or sensors from Home Zone Security, selecting a
specific channel to connect all linkable security lights and sensors.
They will be grouped as an invisible system and working together.
One linkable light triggered, all linkable lights on.
CHANNELS
Use 3pcs 1.2V AA size 2200mAh Ni-MH rechargeable battery. For
best performance, replaced with the new Ni-MH rechargeable
batteries every 18 months. When the battery expires, it must be
recycled or disposed of properly. Please contact your local waste
disposal authority for correct procedure. Do not put batteries into fire.
•
Only rechargeable batteries are to be used.
•
Do not mix old and new batteries.
•
Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.
•
Exhausted batteries must be removed from the product.
•
Batteries must be placed at the correct polarity.
RECHARGEABLE BATTERY
1. Remove the 4 screws from the bottom of the base and the battery
cover.
2. Take all batteries out of the battery chamber.
3. Replace with 3 new 1.2V AA size 2200mAh Ni-MH rechargeable
batteries.
4. Double check if the polarity is correct.
5. Put the battery cover back and mount 4 screws in position.
BATTERY REPLACEMENT:
CH1 CH2 CH3 CH4
7