Installation Instructions
3. TIME Setting
This setting is used to control the time span of how long the light
remains on when motion is deteced.Set the switch to the 30, 60,
120 seconds position. The security light will stay on as long as
motion is detected and will go off after the time span you set after
no motion is detected.
2. 4 Working Modes
• Test mode: Check the light’s sensory function in order to testthe
sensory range. The time duration for the light will be 5s.
• Auto: The light will turn on to low brightness automatically atnight.
When motion is detected, the light will turn on full brightness for the
selected time duration.
• On: The light will stay on full brightness when it is switched onand
turn off when it is switched off by light switch, whether it is day or at
night.
Product Function Description
1. SENS Setting
Adjust the SENS setting to adjust range of Passive Infrared
Motion Sensor
SENS
MODE
TEST
30S 60S 120S
AUTO ONOFF
Slide toward the “ ” (low) position for short detection range (3-30 ft).
Slide toward the “ ” (Middle) position for middle detection range ( 3-49 ft).
Slide toward the “ ” (high) position for long detection range ( 3-70 ft).
6