User's Guide

Getting Started 11
Any closer and you
might get audio
feedback sounds.
• Press and hold the
On O
button
to turn the Parent
unit on, the Parent
unit and Baby unit are
automatically linked
and ready to use.
2.2 Charge the Parent Unit
The Parent Unit comes with a built-in Li-ion battery.
•
Plug the DC plug of
power adapter
(DC5V/1000mA) into
the Parent unit,
connect the other end
to a suitable electrical
outlet.
• Leave to charge for 16
hours.
The first time you use the Parent unit, or if you haven’t used it for
long time, it’ll take 16 hours to fully charge. The battery life on a
single charge lasts for 4 hours. We recommend you keep the
cable plugged into an electrical outlet if you’re going to use for
longer than this or throughout the night.
When the battery gets very low, it’ll take about 30 minutes to
charge enough for you to use it for a short time. To charge the
Parent unit in the shortest amount of time, turn it off while it’s
charging.
• After the Parent unit has charged for 16 hours you can switch
it on.
• Before you do, move the Parent unit at least 3 feet from the
Baby unit. Any closer and you might get audio feedback
sounds.
• Press and hold the 0 button
to turn
the Parent unit on,
the Parent unit and Baby
unit are automatically linked
and ready to use.