VM482ANXL 2.
Welcome... to your new Motorola Digital Video Baby Monitor! Thank you for purchasing the VM482ANXL. Now you can see and hear your baby sleeping in another room or you can monitor your older children in their playroom. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
Overview of the Parent Unit 5 6 1 2 3 7 OK 4 8 1. 2. 3. Power ON/OFF button 0 Press and hold to turn the Parent Unit on or off. Press to turn the screen off. (Press any button to turn screen back on.) Sound Level indicators Show the sound level detected by the Baby Unit - the louder the sound detected, the more LEDs light up. Control key panel UP / VOLUME+ When in monitor mode, press to increase speaker volume. When in a menu, press to move up. When in zoom mode, press and hold to move up the image.
Parent Unit menu and status icons Connection Status (4 Levels) Indicates the signal strength between the Baby Unit and Parent Unit, with more bars for a stronger signal. displays when the link between the Parent Unit and the Baby Unit is lost. Patrol mode (for multi-cameras only) - Displays when the Parent Unit is in patrol mode. Current view status - Indicates the number of the Baby Unit that is being viewed in fixed or patrol mode. Zoom Select - Displays when in Zoom mode.
Overview of Your Baby Unit 1 2 3 4 5 6 7 8 9 1. 2. 3. 4. 5. Power ON/OFF switch Slide to turn the Baby Unit on or off. Microphone For transmitting sound to the Parent Unit. Infra-red LEDs 6 infra-red LEDs for night vision. (Note: picture will not be in colour for night vision.) Light Sensor (Night Vision Mode) For detecting when to switch on the infra-red LEDs. Camera Lens For transmitting video to the Parent Unit. 6. 7. 8. 9.
Table of contents 1. 2. Safety Instructions ..................................................................................... 7 Getting Started........................................................................................ 10 2.1 2.2 2.3 2.4 3. Using the Baby Monitor........................................................................... 14 3.1 3.2 3.3 3.4 3.5 4. 6 Setting Up..................................................................................................
1. Safety Instructions WARNING: Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3ft away). Do not remove this tag. Never use extension cords with AC Adapters. Only use the AC Adapters provided.
BABY UNIT SET UP & USE: • • • Determine a location for the Baby Unit that will provide the best view of your baby in his/her crib. Place the Baby Unit on a flat surface, such as a dresser, bureau, or shelf or mount the Unit to a wall securely using the keyhole slots in the underside of the stand. NEVER place the Baby Unit or cords within the crib.
• Only insert a battery pack of the same type. • Do not touch the plug contacts with sharp or metal objects. • Connect the power adapters to easily accessible electrical outlets. CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to their instructions. Use only the rechargeable battery pack with rating: 3.
2. Getting Started 2.1 Baby Unit Power Supply ON/OFF switch 1. 2. 3. 4. Insert the DC plug of the power adapter into the DC socket on the back of the Baby Unit. Connect the other end of the power adapter to a suitable electrical outlet. Slide the ON/OFF switch to the ON position. The power LED lights up in green, or flashes if searching for the Parent Unit. Slide the ON/OFF switch to the OFF position to switch off the Baby Unit. NOTE Only use the supplied power adapter (5V DC / 1000mA).
2.2 Parent Unit Battery Installation A rechargeable battery pack is supplied and should be installed and charged, so that the Parent Unit can be moved without losing the link and picture from the Baby Unit(s). Charge the battery in the Parent Unit before using it for the first time or when the Parent Unit indicates that the battery is low (flashes in red). 1. 2. 3. Remove the battery compartment cover.
2.3 1. 2. Parent Unit Power Supply Insert the DC plug of the power adapter into the DC socket on the side of the Parent Unit. Connect the other end of the power adapter to a suitable electrical outlet. The AC power/battery status indicator lights up in red. IMPORTANT Only use the supplied power adapter and battery pack. While the Parent Unit can work with the power adapter connected, without a battery pack, it is recommended that you install and charge the rechargeable battery pack fully before use.
2.4 Desktop Stand of the Parent Unit Flip out the stand on the back of the Parent Unit to set up the desktop stand.
3. Using the Baby Monitor Please read these instructions carefully, and be aware that this baby monitor is only intended as an aid. It is not a substitute for responsible adult supervision. 3.1 Setting Up • Make sure that the Baby Unit and Parent Unit are both switched on. • Place the Baby Unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor.
3.4 Night Vision Mode The Baby Unit has 6 high-intensity infrared LEDs for picking up clear images in the dark. When the built-in photo sensor on the front of the unit detects a low level of ambient light, the LEDs will automatically activate and the screen on the icon will be displayed at the Parent Unit will display in black and white. The top of the screen. 3.5 Turn off Parent Unit LCD Screen You can turn off the Parent Unit screen without switching off the Parent Unit.
4. Parent Unit Menu Options 4.1 Adjust Speaker Volume You can adjust the speaker volume from Volume 1 to Volume 5, or turn it off. Press + or - on the Parent Unit when it is in camera viewing mode. When the speaker volume is set to off, the screen displays . 4.2 LCD Brightness You can adjust the brightness of the Parent Unit screen from Level 1 to Level 5. 1. Press M when the Parent Unit is in camera viewing mode to show the menu options with displayed in red. 2. Press O, then 3.
4.3.1 Set lullaby You can play calming sounds on the Baby Unit to comfort your baby. 1. 2. 3. 4. Press M when the Parent Unit is in camera viewing mode. to scroll to . Press < or Press O, then or to choose your desired lullaby. Press O to confirm your selection. 4.4 Monitor the Temperature Your Baby Unit measures the surrounding temperature. If the detected temperature goes outside a selected temperature range, you can set the Parent Unit to emit an alert tone and show a warning message on the screen.
4.4.3 Temperature Alert You can set whether to receive a visual and audible alert when the room temperature goes outside the selected temperature range. 1. 2. 3. 4. 5. 4.5 1. 2. 3. 4. 5. Press M when the Parent Unit is in camera viewing mode. to scroll to . Press < or Press O, then or to scroll to and press the O button. Press or to choose On or Off. Press O to confirm your selection. Remove a Baby Unit from the Parent Unit Press M when the Parent Unit is in camera viewing mode.
Set Mood Light 4.8 The mood light feature provides a soft glow to help soothe your baby to sleep and help keep them calm throughout the night, the mood light has 7 colour options (or auto looping) and 3 levels of brightness available. 4.9 Pair and Replace a Baby Unit The Baby Units and Parent Unit provided are already paired. You can add or replace a Baby Unit in your video and audio monitoring system. You can pair a maximum of four Baby Units to your Parent Unit.
5. Disposal of the Device (environment) At the end of the product’s life cycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the Product, User’s Guide and/or box indicates this. Some of the product materials can be reused if you take them to a recycling point.
6. Cleaning Clean your Baby Monitor with a slightly damp or anti-static cloth. Never use cleaning agents or abrasive solvents. Cleaning and care • Do not clean any part of the product with thinners or other solvents and chemicals –- this may cause permanent damage to the product which is not covered by the Warranty. • Keep your Baby Monitor away from hot, humid areas or conditions, strong sunlight and avoid moisture.
7. Troubleshooting Power/Link Indicator on the Parent Unit does not come on • Check whether the Parent Unit is powered on. • Check whether the supplied battery pack is correctly installed and that it is charged. • Recharge the Parent Unit by connecting it to the power supply. Power/Link Indicator on the Baby Unit flashes • The Baby Unit may not be paired with the Parent Unit. Refer to section 4.8 to pair the Baby Unit. • The Parent Unit and the Baby Unit may be out of range with each other.
Cannot hear sound or baby crying from the Parent Unit • The volume level in the Parent Unit may be set too low. Increase the volume level of the Parent Unit. Refer to section 4.1 for volume level settings. • The Parent Unit and the monitoring Baby Unit may be out of range with each other. Reduce the distance between the units, but not closer than 1 meter. The baby monitor system produces a high-pitched noise • The Parent Unit and the Baby Unit are too close to each other.
8. General Information lf your product is not working properly.... 1. 2. Read this User’s Guide or the Quick Start Guide. Visit us at: motorolanursery.com/support To order a replacement battery pack, contact customer service. Consumer Products and Accessories Limited Warranty ("Warranty") Thank you for purchasing this Motorola branded product manufactured under license by Meizhou Guo Wei Electronics Co. LTD ("MZGW").
What will MZGW do? MZGW or its authorized distributor at its option and within a commercially reasonable time, will at no charge repair or replace any Products or Accessories that do not conform to this Warranty. We may use functionally equivalent reconditioned/ refurbished/ pre-owned or new Products, Accessories or parts.
Products Covered Consumer Products Length of Coverage Two (2) years from the date of the Products’ original purchase by the first consumer purchaser of the product. Consumer Accessories Ninety (90) days from the date of the Accessories’ original purchase by the first consumer purchaser of the product. Consumer Products and Accessories The balance of the original warranty or that are Repaired or Replaced for Ninety (90) days from the date returned to the consumer, whichever is longer.
Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola branded housings, or parts, are excluded from coverage. Communication Services.
FCC and IC regulations FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
ISED Warning This device complies with Innovation, Science, and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d' Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence.
9. Technical Specifications Baby Unit Frequency 2405 - 2475 MHz Operating Temperature Image sensor Power Supply Adapter 0oC - 45oC color CMOS 0.3M Pixels Input: 100-240V, 50/60Hz 150mA Rating Output 5VDC, 1000mA. Parent Unit Frequency 2405 - 2475 MHz Operating Temperature Display Battery Rating 0oC - 45oC 2.8" diagonal TFT LCD 3.7V 1200mAh Li-ion battery pack Power Supply Adapter Input: 100-240V, 50/60Hz 150mA.
Manufactured, distributed or sold by Meizhou Guo Wei Electronics Co. LTD., official licensee for this product. MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. © 2021 Motorola Mobility LLC. All rights reserved.
