User's Guide

Parent Unit Status Icons
Important guidelines for installing your baby monitor
• To use your Baby Unit and Parent Unit together, you must be able to
establish a radio link between them, and the range will be affected by
environmental conditions.
• Any large metal object, like a refrigerator, a mirror, a filing cabinet, a
metallic door or reinforced concrete, between the Baby Unit and Parent
Unit may block the radio signal.
• The signal strength may also be reduced by other solid structures, like
walls, or by radio or electrical equipment, such as TVs, computers,
cordless or mobile phones, fluorescent lights or dimmer switches.
• If the signal is poor, try moving the Parent Unit and/or the Baby Unit to
different positions in the rooms.
Connection status
- displays when strong signal strength is detected between
the Baby Unit and the Parent Unit.
- or displays when moderate signal strength is detected
between the Baby Unit and the Parent Unit.
- flashes when the Parent Unit is out of the valid range.
- displays when the link between the Baby Unit and the Parent
Unit is lost.
Patrol mode
- Displays when the Parent Unit is in patrolling mode.
Current view status
- Displays the number of the Baby Unit that is being viewed in
patrol mode.
Zoom
- Displays when the microphone is muted.
Volume off
- Displays when the volume is turned off.
20°C
or
69°F
Te m p e r a t u r e
- Displays the current temperature the Baby Unit has detected.
Battery status
- > > > animates when the battery is charging.
- displays solid when the battery is fully charged.
- displays when the battery is low and needs charging.
- displays when no battery is installed and AC power is being
used, or when the battery has been installed incorrectly.