User's Guide

Using Your Baby Monitor 15
3.9 Set the screen off time of the Parent Unit
You can set the screen off time of the Parent Unit after being in idle mode for a
particular time interval.
1. Press when the Parent Unit is not in use.
2. Press < or to scroll to .
3. Press
or select ( 60m , 30m , 5m or OFF ).
4. Press O to confirm your selection.
3.10 Zoom
You can zoom in or out while viewing the image from Baby Unit.
1. Press to zoom in.
2. Press and hold <, ,
or to move the zoomed image upward,
downward, leftward or rightward correspondingly.
3. Press to zoom out.
3.11 Pair and replace extra new Baby Unit
The Baby Units and Parent Unit provided are already paired. You can add or
replace a Baby Unit in your video and audio monitoring system.
You can pair a maximum of four Baby Units to your Parent Unit. Each new Baby
Unit must be paired to the Parent Unit before use.
To pair and replace a Baby Unit:
1. Press when the Parent Unit is not in use.
2. Press < or to scroll to .
3. Press
or to choose a desired Baby Unit slot, then press O. The
pairing mode starts.
4. Turn o n th e n ew B a by U n it, a nd then immediately press and hold
Pair until
the Power/Link indicator turns on.
NOTE
If you choose an occupied Baby Unit slot, the new Baby Unit will replace the
existing Baby Unit.