User's Guide

14 Using Your Baby Monitor
3.6 Set the alarm on the Parent Unit
You can use the Parent Unit to set the alarm as a reminder for you to take care of
your baby.
Turn on and set the alarm when it is currently off:
1. Press when the Parent Unit is not in use.
2. Press < or to scroll to .
3. Press
or to choose On , then press O.
4. Press
or to choose 2h , 3h , 4h , 5h or 6h .
5. Press O to confirm your selection.
Turn off the alarm when it is currently on:
1. Press when the Parent Unit is not in use.
2. Press < or to scroll to .
3. Press
or to choose Off .
4. Press O to confirm your selection.
3.7 Monitor the temperature
Your Baby Unit measures the surrounding temperature. If the detected
temperature falls beyond a desired temperature range, you will hear an alert
tone. You can change the settings for the temperature format as follows.
3.7.1 Temperature format
You can choose to display the temperature in °F or °C.
1. Press when the Parent Unit is not in use.
2. Press < or to scroll to .
3. Press
or to choose °F or °C .
4. Press O to confirm your selection.
3.8 Delete a Baby Unit
You can choose to remove a paired Baby Unit from the Parent Unit.
1. Press when the Parent Unit is not in use.
2. Press < or scroll to .
3. Press
or to select the desired Baby Unit ( 1 , 2 , 3 or 4 ).
4. Press
or to choose YES or NO .
5. Press O to confirm your selection.