VM482 2.
Welcome... to your new Motorola Baby monitor! Thank you for purchasing the Digital Video Baby Monitor. Now you can see and hear your baby sleeping in another room or you can monitor your older children in their play room. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
Overview of your Baby Unit 2 1 1. 2. 3. 3 Power ON/OFF switch Slide to turn the Baby Unit on or off. Power/Link indicator Green when the Baby Unit is turned on and linked to the Parent Unit. Flashes Green when the Baby Unit is searching for the Parent Unit, or is in the pairing process. Off when the Baby Unit is powered off. PAIR Press and hold to pair to the Parent Unit.
Overview of the Parent Unit 4 1 5 2 6 3 7 8 1. 2. Sound Level indicators The sound level indicators show the sound level as detected by the Baby Unit. Sound level detected by the Baby Unit: The more LEDs light on, the stronger the sound is detected. Control key panel UP / VOLUME Press to increase the speaker volume. While in the menu, press to scroll up. While viewing a zoomed image, press and hold to move the image upward. DOWN / VOLUME Press to decrease the speaker volume.
Parent Unit Status Icons Connection status displays when strong signal strength is detected between the Baby Unit and the Parent Unit. or displays when moderate signal strength is detected between the Baby Unit and the Parent Unit. flashes when the Parent Unit is out of the valid range. - displays when the link between the Baby Unit and the Parent Unit is lost. Patrol mode - Displays when the Parent Unit is in patrolling mode.
Table of contents 1. 2. Safety Instructions ..................................................................................... 7 Getting Started........................................................................................ 10 2.1 2.2 2.3 3. Connecting Baby Unit to power............................................................... 10 Installing the battery and connecting Parent Unit to power.................... 11 Desktop Mount of Parent Unit ................................................
1. Safety Instructions WARNING: STRANGULATION HAZARD - Keep the unit and adaptor cord more than 3 feet from the crib and out of the baby's reach. NEVER place Baby Unit or cords within the crib. Secure the cords more than 3 feet away from the baby's reach. Never use extension cords with AC Adaptors. Only use the AC Adaptors provided.
BABY UNIT SET UP & USE: ● Determine a location for the BABY UNIT that will provide the best view of your baby in his/her crib. ● Place the BABY UNIT on a flat surface, such as a dresser, bureau, or shelf or mount the Unit to a wall securely using the keyhole slots under the stand. ● NEVER place the Baby Unit or cords within the crib. WARNING This Baby Monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User's Guide, safe to use.
CAUTION You chance the risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to their instructions. Use only the rechargeable battery pack with rating: 3.
2. Getting Started 2.1 1. 2. Connecting Baby Unit to power Insert the DC plug of the power adaptor with the smaller DC plug into the DC jack in the side of the Baby Unit. Connect the other end of the power adaptor to a suitable power outlet. NOTE Only use the power adaptor provided.
2.2 Installing the battery and connecting Parent Unit to power A rechargeable battery pack is supplied and should be fitted, so that the Parent Unit can be moved without losing the link and picture from the Baby Unit(s). Charge the Parent Unit before you use it for the first time or when the Parent Unit indicates that the battery is low. 1. 2. 3. 4.
5. Connect the other end of the power adaptor to a suitable power outlet, the battery level indicator turns comes on. NOTE Only use the provided power adaptor and battery pack. The Parent Unit can work with the power adaptor connected but without a battery pack installed. 2.3 Desktop Mount of Parent Unit • Flip the stand from Parent rear to open position for desktop mount.
3. Using Your Baby Monitor Please read these instructions carefully, and be aware that this baby monitor is only intended as an aid. It is not a substitute for responsible, correct parental supervision. 3.1 Power on or off the Baby Unit Slide the Power ON/OFF switch to turn on the Baby Unit. The Power/Link indicator light turns on. Slide the Power ON/OFF switch to turn off the Baby Unit. The Power/Link indicator light turns off. 3.
3.6 Set the alarm on the Parent Unit You can use the Parent Unit to set the alarm as a reminder for you to take care of your baby. Turn on and set the alarm when it is currently off: 1. 2. 3. 4. 5. Press when the Parent Unit is not in use. Press < or to scroll to . Press or to choose On , then press O. Press or to choose 2h , 3h, 4h, 5h or 6h. Press O to confirm your selection. Turn off the alarm when it is currently on: 1. 2. 3. 4. Press when the Parent Unit is not in use. Press < or to scroll to .
3.9 Set the screen off time of the Parent Unit You can set the screen off time of the Parent Unit after being in idle mode for a particular time interval. 1. Press when the Parent Unit is not in use. 2. Press < or to scroll to . 30m, 5m or OFF). 3. Press or select ( 60m , 4. Press O to confirm your selection. 3.10 Zoom You can zoom in or out while viewing the image from Baby Unit. 1. 2. 3. Press to zoom in.
4. Disposal of the Device (environment) At the end of the product life cycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user's guide and/or box indicates this. Some of the product materials can be re-used if you take them to a recycling point.
5. Cleaning Clean your Baby Monitor with a slightly damp cloth or with an anti-static cloth. Never use cleaning agents or abrasive solvents. Cleaning and care • Do not clean any part of the Baby Monitor with thinners or other solvents and chemicals - this may cause permanent damage to the product which is not covered by the warranty. • Keep your Baby Monitor away from hot, humid areas or strong sunlight, and do not let it get wet.
6. Troubleshooting Power Indicator on the Parent Unit does not come on • Check whether the Parent Unit is powered on. • Check whether the battery pack supplied is correctly installed and that they are not drained. • Recharge the Parent Unit by connecting it to the power supply. Power/Link Indicator on the Baby Unit flashes • The Baby Unit may not be paired to the Parent Unit. Refer to section 3.11 to pair the Baby Unit. • The Parent Unit and the Baby Unit may be out of range with each other.
Cannot hear sound or baby crying from the Parent Unit • The volume level in the Parent Unit may be set too low. Increase the volume level of the Parent Unit. Refer to section 3.4 for volume level settings. • The Parent Unit and the monitoring Baby Unit may be out of range with each other. Reduce the distance between the units, but not closer than 3 feet. The baby monitor system produces a high-pitched noise • The Parent Unit and the Baby Unit are too close to each other.
7. General Information lf your product is not working properly.... 1. Read this User’s Guide. 2. Visit our website: motorolanursery.com/support To order a replacement battery pack for the Parent Unit, contact Customer Service. Consumer Products and Accessories Limited Warranty ("Warranty") Thank you for purchasing this Motorola branded product manufactured under license by Meizhou Guo Wei Electronics Co. LTD ("MZGW").
What Other Limitations Are There? ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
Products Covered Consumer Products Length of Coverage Two (2) years from the date of the product's original purchase by the first consumer purchaser of the product. Consumer Accessories Ninety (90) days from the date of the accessories' original purchase by the first consumer purchaser of the product. Consumer Products and The balance of the original warranty or for Accessories that are Repaired or Ninety (90) days from the date returned to Replaced the consumer, whichever is longer.
Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola branded housings, or parts, are excluded from coverage. Communication Services.
FCC and IC regulations FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
ISED Warning This device complies with Innovation, Science, and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d' Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence.
Technical Specifications Baby Unit Frequency Operating temperature 2405 - 2475 MHz 0ºC - 45ºC Image sensor Power supply adaptor Color CMOS 0.3M Pixels Input 100-240VAC, 50/60Hz, 150mA Rating Output 5VDC, 1000mA.
Parent Unit Frequency Operating temperature 2405 - 2475 MHz 0ºC - 45ºC Display 2.4" diagonal TFT LCD Battery rating 3.7V 1200mAh Li-ion battery pack Power supply adaptor Input 100-120VAC, 50/60Hz, 150mA. Rating Output 5VDC, 1000mA. Specifications are subject to change without prior notice.
Manufactured, distributed or sold by Meizhou Guo Wei Electronics Co. LTD., official licensee for this product. MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. © 2021 Motorola Mobility LLC. All rights reserved.
