User's Guide

Parent Unit Menu Options
16
- DOWN button to select the desired Camera, and press the O
button to start searching for a camera unit.
Note: If a camera is currently paired with the Parent Unit, its camera location
(with a * against it) cannot be selected for a new registration.
5. Press and hold the PAIR button on the underside of the Baby Unit until the
Parent Unit finds the camera, beeps and PAIR OK appears on the screen. The
video from the camera will then appear.
NOTE
A camera can only be registered to one Parent Unit at any one time.
4.6.2 View a camera
1. Press the M button and the menu bar will pop up.
2. Press the
< LEFT button or > RIGHT button until is highlighted, and
the del/ add/ view/ scan menu will pop up.
3.
Press the + UP button or - DOWN button to select add, and press the
O button to confirm.
4. Camera / / / will pop up. Press the + UP button or
- DOWN button to select the desired Camera, and press the O
button to view the picture from that camera.
Note:
Only camera locations with a * can be selected.
TIP
You can also press the OK button repeatedly to select the avail-able
camera options from
/ / / , scan.
4.6.3 Delete a camera
1. Press the M button and the menu bar will pop up.
2.
Press the < LEFT button or > RIGHT button until is
highlighted, and the del/ add/ view/ pop up.
scan menu will