User's Guide
Table Of Contents
- 1. Safety Instructions
- 2. Getting Started
- 2.1 Baby Unit Power Supply
- 2.2 Parent Unit Power Supply
- 2.3 Registration (Pairing)
- 3. Using the Baby Monitor
- 3.1 Setting up
- 3.2 Pan and Tilt
- 3.3 Night Vision Mode
- 3.4 Talk Mode
- 3.5 Video ON/OFF
- 3.6 Temperature Display (HH °C / °F or LL °C / °F)
- 4. Parent Unit Menu Options
- 4.1 Volume
- 4.2 Brightness
- 4.3 Lullaby Sounds
- 4.4 Zoom
- 4.5 Alarm
- 4.6 Camera Control
- 4.6.1 Add (pair) a camera
- 4.6.2 View a camera
- 4.6.3 Delete a camera
- 4.6.4 Scan camera
- 4.7 Temperature
- 4.8 Power Saving mode
- 4.9 View multiple cameras on screen
- 5. Disposal of The Device (environment)
- 6. Cleaning
- 7. Help
- 8. General Information
10 Getting Started
2. Getting Started
2.1 Baby Unit Power Supply
1.
Connect the USB-
Type C plug of the power adapter to the Baby Unit
(camera) and the other end to a suitable mains power outlet.
NOTE
Only use the enclosed power adapter (5V DC / 1000mA).
2. Slide the POWER ON/OFF switch to the ON position. The power LED will
light up in Amber.
3. Slide the POWER ON/OFF switch to the OFF position to turn the Baby Unit
off.
IMPORTANT
The Baby Unit is able to operate without mains power for up to 3 hours with the
support of a built-in rechargeable battery (Lithium-ion Battery 3.7V, 1200mAh).
Please charge the unit at least 16 hours before first time use.
The battery is not a user-accessible item. Please contact the Helpline if you think
it needs replacing.