User's Guide

17
Parent Unit Menu Options
4.6.4 Scan camera
This function is only available when you have more than 1 Baby
Unit (Camera).
1. Press the
M
button and the menu bar will pop up.
2. Press the
<
LEFT button or
>
RIGHT button until
is
highlighted, and the
del/ add/ view/ scan menu will
pop up.
3. Press the
+
UP button or
-
DOWN button to select
scan,
and press the
O
button to confirm.
4. The screen will then display images from dierent registered
cameras in a loop of Camera
/ / / , changing about
every 12 seconds.
TIP
You can also press the
O
button repeatedly to select the avail-
able camera options from
/ / / , scan.
4.7 Temperature
is
1. Press the
M
button and the menu bar will pop up.
2. Press the
<
LEFT button or
>
RIGHT button until
highlighted.
3. Press
O
, then
+
UP /
-
DOWN to select °C or °F.
4.8 Power Saving mode
1. Press the
M
button and the menu bar will pop up.
2. Press the
<
LEFT button or
>
RIGHT button until
V
is
highlighted.
3. Press the
+
UP button or
-
DOWN button to select auto video
o after 5 mins, 30 mins or 60 mins (if operating on batteries
only)..
NOTE
The audio will remain and you can press any key to switch the
video back on.