User's Guide
Table Of Contents
- 1. Getting started
- 2. Getting to know your phone
- 3. Using the phone
- 4. Contacts
- 5. Clock and alarm
- 6. Call control
- 6.1 Call barring
- 6.2 Call block
- 6.2.1 Block all international calls
- 6.2.2 Block all private calls
- 6.2.3 Block all unavailable calls
- 6.2.4 Block all payphone calls
- 6.2.5 Turn call block on / off
- 6.2.6 Add a number to the call block list
- 6.2.7 Edit a number in the call block list
- 6.2.8 Delete a number from the call block list
- 6.2.9 Delete the blocked list
- 7. Caller ID and calls list
- 8. Handset settings
- 9. Advanced settings
- 10. Registration
- 11. Software version
- 12. Using your Answering Machine
- 12.1 Switch the answering machine on / off
- 12.2 Listening to messages
- 12.3 Adjust the speaker volume
- 12.4 Delete messages
- 12.5 Announcement
- 12.6 Record a memo
- 12.7 Answer settings
- 12.8 Remote access
- 12.9 Remote access on/off and setting the remote access PIN
- 12.10 Change the remote access PIN
- 12.11 Memory full
- 13. Help
- 14. Technical Specifications
- 15. General information
40
Advanced settings
9. Advanced settings
9.1 Base ringer volume
You can adjust the ringer volume and set dierent volume levels. Choose from
5 volume levels or O.
1. Press
Menu
, scroll u to
Settings
and press
OK
.
2. Scroll
d to
Advanced settings
. Press
OK
.
3.
Base sounds
is displayed. Press
OK
.
4. The display shows
Ringing
. Press
OK
.
5. The display shows
Ringing volume
and press
OK
.
6. Scroll
u or d to adjust the ringer volume level.
7. Press
OK
to confirm.
8. Press e to return to standby.
9.2 Dial mode
The default CD5 dialing mode is suitable for your country and network
operator. It is unlikely that you should need to change this setting unless
advised to do so.
1. Press
Menu
, scroll u to
Settings
and press
OK
.
2. Scroll
d to
Advanced settings
. Press
OK
.
3. Scroll
d to
Dial Mode
. Press
OK
.
4. Scroll
u or d to select
Tone
or
Pulse
.
5. Press
OK
to confirm.
6. Press e to return to standby.
9.3 Flash time
This setting is useful to access certain network and PABX/switchboard
services.
The default CD5 flash time is suitable for your country and network operator. It
is unlikely that you should need to change this setting unless advised to do so.
1. Press
Menu
, scroll u to
Settings
and press
OK
.
2. Scroll
d to
Advanced settings
. Press
OK
.
3. Scroll
d to
Flash time
. Press
OK
.
4. Scroll
u or d to select the setting you want:
Short
,
Medium
,
Long
.
5. Press
OK
to confirm.
6. Press e to return to standby.
Note
The functionality of your CD5 cannot be guaranteed on all PABX.