User's Guide
Table Of Contents
- 1. Getting started
- 2. Getting to know your phone
- 3. Using the phone
- 4. Contacts
- 5. Clock and alarm
- 6. Call control
- 6.1 Call barring
- 6.2 Call block
- 6.2.1 Block all international calls
- 6.2.2 Block all private calls
- 6.2.3 Block all unavailable calls
- 6.2.4 Block all payphone calls
- 6.2.5 Turn call block on / off
- 6.2.6 Add a number to the call block list
- 6.2.7 Edit a number in the call block list
- 6.2.8 Delete a number from the call block list
- 6.2.9 Delete the blocked list
- 7. Caller ID and calls list
- 8. Handset settings
- 9. Advanced settings
- 10. Registration
- 11. Software version
- 12. Using your Answering Machine
- 12.1 Switch the answering machine on / off
- 12.2 Listening to messages
- 12.3 Adjust the speaker volume
- 12.4 Delete messages
- 12.5 Announcement
- 12.6 Record a memo
- 12.7 Answer settings
- 12.8 Remote access
- 12.9 Remote access on/off and setting the remote access PIN
- 12.10 Change the remote access PIN
- 12.11 Memory full
- 13. Help
- 14. Technical Specifications
- 15. General information
22
Using the phone
3.5.4 3-way conference call
You can hold a 3-way conference call between 2 internal callers and 1 external
caller.
1. During an external call, press
Options
.
Your caller is put on hold.
2. The display shows
Conference
, press
OK
,
• If you only have two handsets, the other handset is called automatically.
• If more than two handsets are registered to the base, scroll d to the
number of the handset you want to call and press
Call
.
3. When the other handset answers, announce the caller then press
Join
to
connect all three callers and begin the conference call. If the other handset
does not answer, press
End
to talk to your caller again.
4. Press e to hang up.
3.6 Call Waiting with Caller ID
To use Call Waiting with Caller ID, you must first subscribe with your phone
service provider. These features allows you to receive calls while you are
already talking on the phone. If you receive a call while on the phone, you will
hear a call waiting tone.
1. If you have Call Waiting Caller ID, press
Switch
or press and hold
#
to answer the
2nd call.
If you do not subscribe to Caller ID, when you hear the call waiting tone,
press
Options
. Scroll d to
Answer Call Waiting
and press
OK
.
2. Press
Switch
or press and hold
#
to switch between calls.
Note
If you do not subscribe to Caller ID, when you hear the call waiting tone, press
Options
. Scroll d to
Answer Call Waiting
and press
OK
.
3.7 Keypad lock
Prevent accidental dialing while carrying the handset by locking the keypad.
While the keypad is locked, you can answer incoming calls as normal.
1. Press and hold
S
.
The display shows
Keypad locked
and is displayed.
2. To unlock the handset, press and hold
S
again.
3.8 Voicemail
If you have subscribed to your network’s voicemail service (if available), your
CD5 displays
New VMW
when you have a new message.
1
Note
When viewing the Calls list, press and hold
5
for 2 seconds, the display shows
Delete all voicemail
, press
OK
to delete.
1
This feature is dependent on your Network Service provider supporting the
service. A subscription fee may be payable.