User's Guide
Table Of Contents
- 1. Safety Instructions
- 3. Using Your Digital Audio Baby Monitor
- 4. Disposal of the Device (environment)
- 6. Troubleshooting
- Power/Link Indicator on the parent unit does not come on
- Power/link indicator on the parent unit flashes and ‘Not Linked’ displayed on the screen.
- Indicator on the parent unit screen flashes
- The parent unit beeps
- Cannot hear sound or baby cry from the parent unit
- The Digital Audio Baby Monitor system produces a high- pitched noise
- Battery pack in the parent unit is running low quickly
- 7. General Information
Overview of the Baby Unit
1.
Microphone
2.
Power button
0
Press and hold to power on/off
the baby unit.
3.
Speaker
4.
Power indicator
On when the baby unit is
powered on.
5.
Power jack
6.
Temperature sensor
Important guidelines for installing your digital baby monitor
•
To use your baby unit and parent unit together, you must be able to
establish a radio link between them. Note - The range may be affected
by environmental conditions.
•
Any large metal object, like a refrigerator, a mirror, a filing cabinet, a
metallic door or reinforced concrete, between the baby unit and
parent unit may block the radio signal.
•
The signal strength may also be reduced by other solid structures,
like walls, or by radio or electrical equipment, such as TVs, computers,
cordless or mobile phones, fluorescent lights or dimmer switches.
•
If the signal is poor, try moving the parent unit and/or the baby unit to
a different position in the room.