User's Guide
Table Of Contents
- 1. Safety Instructions
- 3. Using Your Digital Audio Baby Monitor
- 4. Disposal of the Device (environment)
- 6. Troubleshooting
- Power/Link Indicator on the parent unit does not come on
- Power/link indicator on the parent unit flashes and ‘Not Linked’ displayed on the screen.
- Indicator on the parent unit screen flashes
- The parent unit beeps
- Cannot hear sound or baby cry from the parent unit
- The Digital Audio Baby Monitor system produces a high- pitched noise
- Battery pack in the parent unit is running low quickly
- 7. General Information
Troubleshooting
16
6.
Troubleshooting
Power/Link Indicator on the parent unit does not come on
•
Check whether the parent unit is powered on.
•
Check whether the supplied battery pack is correctly installed and
that they are not drained.
•
Recharge the parent unit by connecting it to the mains power.
Power/link indicator on the parent unit flashes and ‘Not Linked’
displayed on the screen.
•
The parent unit and the baby unit may be out of range with each
other. Reduce the distance between the units, but not closer than 1
metre.
•
The baby unit may be powered off. Press and hold
0
to power on
the baby unit.
Indicator on the parent unit screen flashes
•
Battery pack in the parent unit is running low. Connect the parent unit
to the mains power with the supplied power adapter for recharging.
The parent unit beeps
•
The parent unit may have lost connection with the baby unit.
Reduce the distance between the parent unit and the baby unit,
but not closer than 1 metre.
•
The baby unit may be powered off. Press and hold
0
to power on
the baby units.
•
Battery pack in the parent unit is running low. Connect the parent
unit to the mains power with the supplied power adapter for
recharging.