User's Guide

正面
背面
Product Basic Specifications
Brand name: meitu
Product name: MeituEve
Product model: MS1901
Color: Aurora white
Material: PC / silicone / metal
Operating temperature: 0℃- 40℃
Machine size: 580mm x 420.5mm x 601mm
Rated voltage: 12V
Execution standards: GB4706.1-2005, GB4706.15-2008
Xiamen Meitu Mobile Technology Co., Ltd.
Address: Room 112A, Pioneer Building, Pioneer Park, Torch High-tech Industrial Development Zone, Xiamen
Manufacturer: Kingtronics Corporation of Elec. & Mech. Technology (Zhangzhou) Co., Ltd.
Address: No. 20, Longchi Avenue, Longchi Industrial Park, Taiwanese Investment Zone, Zhangzhou, Fujian Province
Customer Services: 400-990-9696. Website: www.meitu.com
© 2019 All Rights Reserved, Xiamen Meitu Mobile Technology Co., Ltd.
Safety Precautions
The following precautions are to ensure proper use of this device and prevent personal injury and property damage to
users and others. Please strictly follow these precautions.
When analyzing, please keep your eyes closed so as not to damage your eyesight;
Please keep the detection camera and luminaire clean. Otherwise, the performance of the product may be
adversely affected;
Only use the original Meitu power adapter provided with this product. Otherwise, power related issues or damage to
the device may occur;
When in use, please keep the power adapter tightly plugged into the power socket and ensure that it may be easily
plugged and unplugged;
It is recommended that you store this device in a dry, shaded, and cool place when it is not in use for long
periods of time. To avoid damage, please avoid contact with hard objects;
Do not store this product and its accessories in a humid Environment for long periods of time. This may adversely
affect the performance of this product;
The power cord may break if the power adapter is used incorrectly. Stop using this device, if the power cord is
twisted and cannot be restored, or if the power cord or the power connector is damaged, deformed, or broken；
Please keep this device away any open flame sources;
Do not immerse this device into or rinse with water;
Please store this device in a place that is out of the reach of children;
Do not disassemble, repair, or rebuild this device without authorization.
Those who should not use this product
Due to the strong magnet inside, please do not use this product if you fall within any of the following categories
(including but not limited to):
had a pacemaker surgery;
are suffering from or have suffered from retinal detachment;
have metal or other implants on the face due to fractures, plastic surgery, etc.;
have had a sequelae of the head or eye injury due to traffic accidents, etc.;
are advised by doctors to stay away from strong magnets for any other medical reason.
For more safety precautions and usage procedures, please scan the QR code below.
1 .
2 .
3 .
4 .
5 .
6 .
7 .
8 .
9 .
10.
Scope of Warranty
I. Starting from the date of purchase, a one-year warranty service is provided upon presentation of invoice, shopping
list, and warranty card. During the warranty period, if any issues with the device arise as a result of product quality, you
will be entitled to free repair and maintenance services.
II. The following conditions are not covered under warranty:
Products not purchased from the website (www.meitu.com) or Meitu's flagship store on Tmall, or products
that are not authorized for sale (without valid serial numbers);
Products on which the warranty period has expired;
Products with damage caused by unauthorized dismantling or repair;
Products with burnt circuit boards due to human error, such as immersion in liquid or impact from fall;
Products with damage caused by improper installation, use, maintenance, or storage;
A warranty certificate that does not match the product model, or a warranty certificate that has been altered;
Products with damage caused by unforeseeable circumstances.
For any issues during use, you may call Meitu Customer Services at: 400-990-9696.
1 .
2 .
3 .
4 .
5 .
6 .
7 .
Product Model
Product warranty
Product Batch Number S/N
User Information
Sales Party Information
Name
Phone Number
Address
Invoice Number
Purchase Date
Name (with official seal)
Address
Phone Number
Product Introduction
MeituEve main device status
iOS
Power on: the lights on both sides keep on for 3 seconds
To be connected: the lights on both sides breathe
Connected successfully: the lights on both sides keep on
Connection interrupted: the lights on both sides breathe (App prompts that the connection is interrupted)
Power off: the lights on both sides are off
Package Contents
Your package contains the following items:
Please only use original Meitu accessories. Accessories are available at Meitu service centers or on the Meitu website.
Meitu official website: http://eve.meitu.com/
Product Introduction
MeituEve is an intelligent skin analyzer independently developed by Meitu. It provides an accurate, safe, and personalized
skin analysis experience for each user.
CMIIT ID of this product model can be queried at the bottom of the device.
Lens Hood
Tablet Stand User Guide
MeituEve Main Device
Power Adapter
MeituEve Installation Instructions
I. Installation Steps
Open the package and place MeituEve main device on the table (do not touch the color card on the back
of the chin support).
Remove the hood from the package and attach it to the front of the main device. The device is in the correct
position when the “meitu” logo on the hood is parallel to the table top.
Connect the power cord to the back of the MeituEve main device to keep the device charged.
II. Power and Connection
Short press the Power Key on the back of the main device to turn it on. The “meitu” logo on the side of the
main device lights up, and there is a prompt tone, indicating that the MeituEve main device is power-on.
Open App Store on iPad to search for "MeituEve", then click to download and install the APP.
Open the MeituEve APP on the iPad and log in with the store account and password.
Connect the iPad tablet to MeituEve main device. Please place the iPad tablet on the tablet stand and connect
it according to the prompts of the MeituEve APP interface.
1 .
2 .
3 .
1 .
2 .
3 .
4 .
iPad
Power Adapter
MeituEve Power Jack
Socket
Tablet Stand
III. Skin Detection and Results
Log in to the subject's account.
The subject sits down and places their head into the MeituEve main device with their chin on the chin support
and head facing forward. Cover the subject's head with the hood to block external light sources and detect the
skin using the main device by following the instructions on the iPad.
The subject can leave the main device after the “Analysis Complete” tone. The operator presents and explains
the skin analysis report to the subject in front of the iPad screen.
Short press the Power Key at the back to turn off.
IV. Maintenance Instructions
For sanitary reasons, the operator must wipe the chin support with a cotton pad dipped in alcohol after each
use. Please do not let alcohol come into contact with the color card on the back of the device.
The casing for the MeituEve main device is made from environmentally-friendly material: unfortunately, this
means that it stains easily. If it stains, please wipe the stained spot with alcohol and a cotton cloth.
Description of Components
1 .
2 .
3 .
4 .
1 .
2 .
DC IN Power Type-C Power KeyIndicator light
User Guide