User guide

File Name: MEITRACK VT310 User Guide Creator: Cavana Cheung

Project: VT310 Creation Date:

Update Date:

2010-08-26

2012-08-02

Sub Project:

User Guide

Page:

- 8 - of 30

Revision: V7.4 Confidential: External Documentation

- 8 -

4.4.2 Antenna Connection

Connect the GSM Antenna to VT310.

Connect the GPS Antenna to VT310.

- GPS antenna is used to receive satellite signals in the sky. It should be fixed to face the sky, (It is

recommended to place this device under the windshield) and should not be covered or shielded by any

objects containing metal.

4.4.3 Find a suitable place inside the car for installing VT310. Wiring connections must be firm and

reliable. The joints should be wrapped tightly with insulating tape. The unused electrical wire should be

properly insulated.

Check to make sure all wirings have been connected correctly. Then connect the AVL unit to the motor

powe r.

Make a missed phone call the VT310 using a mobile phone to check if the call can go through. The

VT310 should reply with an SMS indicating longitude, latitude, speed and date.

5. Change Password

Command: W******,001,######

Description: Change user’s password.

Note:

1. ****** is user’s password and the default password is 000000. The tracker will only accept commands from a user with the

correct password. Commands with wrong password will be ignored.

2. ###### is the new password. Password should be 6 digits.

Example:

W000000,001,123456

W123456,001,999999

6. Time Zone

Command: W******,032,T

Description: Correct time to your local time

Note:

1. Default time of the tracker is GMT

2. This correction is applied to location reports by SMS and SMS alarms.

T=0, to turn off this function;

T=_[-32768,32767] to set time difference in minutes to GMT.