User guide

File Name: MEITRACK VT310 User Guide Creator: Cavana Cheung

Project: VT310 Creation Date:

Update Date:

2010-08-26

2012-08-02

Sub Project:

User Guide

Page:

- 6 - of 30

Revision: V7.4 Confidential: External Documentation

- 6 -

GPS LED (Blue)

On One button is pressed or input is active

Flashing ( every 0.1 second) The unit is being initialized

Flashing (0.1 second on and 2.9 seconds off) VT310 has a GPS fix

Flashing (1 second on and 2 seconds off) VT310 has no GPS fix

GSM LED (Green)

On A call is coming in / a call is being made

Flashing ( every 0.1 second) The unit is being initialized

Flashing (0.1 second on and 2.9 seconds off) VT310 is connected to the GSM network

Flashing (1 second on and 2 seconds off) VT310 is not connected to the GSM network

Power On/Off Button Press and hold for 3~5 seconds to turn on/off VT310

SOS Button

SOS button is connected with the wires. Press it to send SOS alarm to the

preauthorized phone number.

Mini USB

Used for firmware update, configuration on PC and exporting stored data.

(USB-to-Serial Adaptor is required for firmware update, configuration and exporting

stored data)

SIM Card Holder Insert SIM card here

GSM Antenna Connector for GSM antenna

GPS Antenna Connector for GPS antenna

Screw Holes There are 4 screw holes on the tracker, 2 along either side that act as fixing points to

the vehicle

Microphone (optional) A microphone to be linked out for listening to the cabin (wiretapping)

PINs Connector