User guide

File Name: MEITRACK VT310 User Guide Creator: Cavana Cheung
Project: VT310 Creation Date:
Update Date:
2010-08-26
2012-08-02
Sub Project:
User Guide
Page:
- 23 - of 30
Revision: V7.4 Confidential: External Documentation
Copyright © 2012 Shenzhen Meiligao Electronics Co., Ltd. All rights reserved.
- 23 -
Annex 1. SMS Command List
Note: ****** is user’s password and the default password is 000000. The tracker will only accept commands from a user with the
correct password. Commands with wrong password will be ignored.
Description SMS Command Example
Track on Demand W******,000 W000000,000
Remarks: To get the current location of the tracker, send this command as an SMS or make a telephone call directly to the tracker. After doing so, the
device will report its longitude and latitude by SMS with format as follows:
Latitude = 22 32 36.63N Longitude = 114 04 57.37E, Speed = 2.6854Km/h, 2008-12-24,01:50
Track on Demand
-Google Link
W******,100 W000000,100
Remarks: Send this command to the tracker and you will receive an SMS with a http link. Click on the link and the location can be shown directly on your
mobile phone using Google maps. For example:
http://maps.google.com/maps?f=q&hl=en&q=22.540103,114.082329&ie=UTF8&z=16&iwloc=addr&om=1
(Note: Only smart phones and PDAs support this function.)
Change Password W******,001,###### W000000,001,123456
Remarks: To change user’s password. ###### is the new password. Password should be 6 digits.
Track by Interval W******,002,XXX W000000,002,030
Remarks: To set interval for automatic timed report.
XXX is the interval in minutes. If XXX=000, turn off tracking by time.
In this example, the tracker will send location data back to your mobile phone every 30 minutes.
Authorization W******,003,F,P,T1
(W******,003,F,P,T1,T2)
W000000,003,3,1,88888888
W000000,003,3,1,88888888,99999999
Remarks: To authorize phone numbers for button/Inputs for receiving location reports, SMS alarms or phone calls.
F=0, to turn off this function; (default)
F=1, only sends SMS to the authorized phone number;
F=2, only calls the authorized phone number;
F=3, both SMS and calling.
P=1, set an authorized number for Input 1;
P=2, set an authorized number for Input 2;
T1: Preset phone number. Max.16 digits.
If you need to set different numbers for receiving SMS and phone call, you can use W******,003,F,P,T1,T2, In this case T1 is the phone number for
receiving SMS and T2 for receiving phone calls.
Note: VT310 doesn’t support two-way conversation. Calling only gives ring and reminder to the authorized phone.