User guide

File Name: MEITRACK VT310 User Guide Creator: Cavana Cheung
Project: VT310 Creation Date:
Update Date:
2010-08-26
2012-08-02
Sub Project:
User Guide
Page:
- 12 - of 30
Revision: V7.4 Confidential: External Documentation
Copyright © 2012 Shenzhen Meiligao Electronics Co., Ltd. All rights reserved.
- 12 -
2. APN defaulted as ‘CMNET’;
3. APN + username + password should not over 39 characters.
Example:
W000000,011,CMNET,Meiligao,6688
W000000,011,CMNET
7.6.3 Set IP and Port
Command: W******,012,IP,Port
Description: Set the IP and Port of tracker for GPRS communication.
Note:
1. IP is your server’s IP or the domain name.
2. Port: [1,65534]
Example:
W000000,012, 220.121.7.89,8500
W000000,012,www.meiligao.net,8500
7.6.4 Set DNS Server IP (optional)
Command: W******,009,DNS Server IP
Description: If the domain name you set by the last command (W******,012,IP, Port) doesn’t work, your server IP is not properly
set. You can first use this command to set DNS Server IP (please check with your DNS server provider for the DNS Server IP) and
then redo the command W******,012,IP, Port.
Example: W000000,009,220.23.4.90
7.6.5 Enable GPRS Tracking
Command: W******, 013, X
Description: Enable GPRS tracking function.
Note:
X=0, to turn off GPRS tracking (default);
X=1, to enable GPRS tracking via TCP;
X=2, to enable GPRS tracking via UDP.
Example: W000000,013,1
7.6.6 Set GPRS Interval
Command: W******,014,XXXXX
Description: Set time interval for sending GPRS packets.
Note:
XXXXX should be in five digits and in unit of 10 seconds.
XXXXX=00000, to turn off this function;
XXXXX=00001~65535, time interval for sending GPRS packet and in unit of 10 seconds.
Example: W000000,014,00060
In this example, the tracker will send every 600 seconds (10 minutes).