File Name: MEITRACK VT310 User Guide Creator: Project: VT310 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2012-08-02 - 1 - of 30 External Documentation MEITRACK® GPS Vehicle Tracker User Guide V7.4 VT310 Copyright © 2012 Shenzhen Meiligao Electronics Co., Ltd. All rights reserved.
File Name: MEITRACK VT310 User Guide Creator: Project: VT310 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2012-08-02 - 2 - of 30 External Documentation Contents 1. Product Overview .................................................................................................................... - 3 2. For Your Safety ...................................................................................................................
File Name: MEITRACK VT310 User Guide Creator: Project: VT310 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2012-08-02 - 3 - of 30 External Documentation 1. Poduct Overview VT310 is a GPS/GPRS based tracking device, specially developed and designed for vehicle real-time tracking and fleet management. VT310 has an inbuilt GPS module to obtain accurate position data.
File Name: MEITRACK VT310 User Guide Creator: Project: VT310 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2012-08-02 - 4 - of 30 External Documentation 2. For Your Safety Read these simple guidelines. Not following them may be dangerous or illegal. Proper Connection Do not connect any parts of this product to other incompatible devices. When connecting with other devices, read instructions carefully to ensure proper installation.
File Name: MEITRACK VT310 User Guide Creator: Project: VT310 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Warm start 38 sec., average Cold start 42 sec.
File Name: MEITRACK VT310 User Guide Creator: Project: VT310 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2012-08-02 - 6 - of 30 External Documentation GPS LED (Blue) On One button is pressed or input is active Flashing ( every 0.1 second) The unit is being initialized Flashing (0.1 second on and 2.
File Name: MEITRACK VT310 User Guide Creator: Project: VT310 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2012-08-02 - 7 - of 30 External Documentation PIN Color Function Power Red DC In (power input). Input voltage: 9V~36V. 12V suggested GND Black Ground In White Digital Inputs. In1, In2 and In3 are negative triggering; In4 and In5 are positive triggering Out Yellow Outputs.
File Name: MEITRACK VT310 User Guide Creator: Project: VT310 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2012-08-02 - 8 - of 30 External Documentation 4.4.2 Antenna Connection Connect the GSM Antenna to VT310. Connect the GPS Antenna to VT310. - GPS antenna is used to receive satellite signals in the sky.
File Name: MEITRACK VT310 User Guide Creator: Project: VT310 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2012-08-02 - 9 - of 30 External Documentation For those ahead of GMT, input the time difference in minutes directly. For example, for GMT+8, W000000,032,480. (8 Hours is 480 minutes) ‘-‘is required for those behind GMT. For example, W000000,032,-120.
File Name: MEITRACK VT310 User Guide Creator: Project: VT310 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2012-08-02 - 10 - of 30 External Documentation 7.2 Track by Calling Make a missed call to the tracker and it will report its longitude and latitude by SMS with the following format: Latitude = 22 32 36.63N Longitude = 114 04 57.37E, Speed = 2.6854Km/h, 2008-12-24, 01:50 7.
File Name: MEITRACK VT310 User Guide Creator: Project: VT310 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2012-08-02 - 11 - of 30 External Documentation You can also use local map software on PDA or car navigation device to input the coordinates. 7.5 Track by MS01/MS02 You can also see a physical location on a map with our GPS Tracking Software MS01 or MS02.
File Name: MEITRACK VT310 User Guide Creator: Project: VT310 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2012-08-02 - 12 - of 30 External Documentation 2. APN defaulted as ‘CMNET’; 3. APN + username + password should not over 39 characters. Example: W000000,011,CMNET,Meiligao,6688 W000000,011,CMNET 7.6.3 Set IP and Port Command: W******,012,IP,Port Description: Set the IP and Port of tracker for GPRS communication. Note: 1.
File Name: MEITRACK VT310 User Guide Creator: Project: VT310 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2012-08-02 - 13 - of 30 External Documentation For more information regarding GPRS tracking please refer to GPRS Communication Protocol. 7.7 Track by GpsGate The GT30i supports GpsGate Software. Please contact our company or GpsGate for more information for settings. 8.
File Name: MEITRACK VT310 User Guide Creator: Project: VT310 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2012-08-02 - 14 - of 30 External Documentation 9.2 Detecting Lock Status of Car’s Door or Trunk (Car Boot). Power supply Lock Controller White lock Input 1 or Input 2 or Input 3 unlock Lock Switch When the lock is opened, there will be a negative trigger to Input 1 or Input 2 or Input 3.
File Name: MEITRACK VT310 User Guide Creator: Project: VT310 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2012-08-02 - 15 - of 30 External Documentation 0x0267=>615(decimal)=>(615*6)/1024=3.603515625V(voltage) Application Example - Fuel Level Sensor Fuel level sensors supplied by us are resistance-type sensors with output resistance: 0-200Ω(ohm).
File Name: MEITRACK VT310 User Guide Creator: Project: VT310 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2012-08-02 - 16 - of 30 External Documentation 11.1 Movement Alarm Command: W******,006,X Description: When the tracker moves out of a preset circle scope, it will send an SMS alarm to the authorized phone number for SOS. Note: 1. X is the preset radii to the tracker’s original place. =0, to turn off this function.
File Name: MEITRACK VT310 User Guide Creator: Project: VT310 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2012-08-02 - 17 - of 30 External Documentation 2. Only one alarm can be set in either Movement Alarm or Geo-fence Alarm. 12. Track by Distance Command: W******,303,X Description: Send this command to set distance interval Note: 1. X= [1, 4294967295], suggested to be set above 300 meters; 2. X=0, turn off.
File Name: MEITRACK VT310 User Guide Creator: Project: VT310 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2012-08-02 - 18 - of 30 External Documentation P=5, Output5. F=0, to close the output (open drain); F=1, to open the output (low voltage). Example: W000000,020,1,1 15.2 Output Control (Conditional) Command: W******,120,ABCDE or W******,220,ABCDE Description: Send this command to control the Output of VT310.
File Name: MEITRACK VT310 User Guide Creator: Project: VT310 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2012-08-02 - 19 - of 30 External Documentation Normally two green wires are connected solidly (P1 and P2 are Normal Close[NC] in the relay), when output is open (Output be low voltage), two green wires will disconnect, the engine is then cut.
File Name: MEITRACK VT310 User Guide Creator: Project: VT310 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2012-08-02 - 20 - of 30 External Documentation 18. Track Log 18.1 Log by Interval Command: W******,031,X Description Set time interval for logging GPS information. Log information is stored within the device memory.
File Name: MEITRACK VT310 User Guide Creator: Project: VT310 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2012-08-02 - 21 - of 30 External Documentation Command: W******,026,XX Description: This command puts the tracker in power down mode when it is inactive or immobile for a period of time. In Power Down mode, GPS stops working, GSM enters sleep mode and stops sending out messages.
File Name: MEITRACK VT310 User Guide Creator: Project: VT310 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2012-08-02 - 22 - of 30 External Documentation The tracker can also be configured by computer using the Parameter Editor. This method is much easier and user friendly. Please refer to GPS Tracker Parameter Editor for more information. 24. Copyright and Disclaimer © Shenzhen Meiligao Electronics Co., Ltd. All rights reserved.
File Name: MEITRACK VT310 User Guide Creator: Project: VT310 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2012-08-02 - 23 - of 30 External Documentation Annex 1. SMS Command List Note: ****** is user’s password and the default password is 000000. The tracker will only accept commands from a user with the correct password. Commands with wrong password will be ignored.
File Name: MEITRACK VT310 User Guide Creator: Project: VT310 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Speeding Alarm W******,005,XX Cavana Cheung 2010-08-26 2012-08-02 - 24 - of 30 External Documentation W000000,005,08 Remarks: When the tracker speeds higher than the preset value, it will send an SMS to the authorized phone number for SOS. XX is the preset value of speed and in 2 digits. =00 , to turn off this function; =[01, 20] (unit: 10Km/h).
File Name: MEITRACK VT310 User Guide Creator: Project: VT310 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2012-08-02 - 25 - of 30 External Documentation For example, Latitude = 22 32 36.63N Longitude = 114 04 57.37E, Speed = 2.6854Km/h, 2008-12-24,01:50 B=1, location data complies with NMEA 0183 GPRMC protocol. For example, $GPRMC,161509.000,A,2232.5485,N,11404.6887,E,0.3,153.
File Name: MEITRACK VT310 User Guide Creator: Project: VT310 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2012-08-02 - 26 - of 30 External Documentation X=0, to turn off GPRS tracking (default); X=1, to enable GPRS tracking via TCP; X=2, to enable GPRS tracking via UDP. Set GPRS Interval W******,014,XXXXX W000000,014,00060 Remarks: to set time interval for sending GPRS packets.
File Name: MEITRACK VT310 User Guide Creator: Project: VT310 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: W******,220,ABCDE Cavana Cheung 2010-08-26 2012-08-02 - 27 - of 30 External Documentation W000000,220,10000 Remarks: This function is achievable only when the speed is below 10km/h(command 120) or 20km/h(command 220) and meantime GPS is available. ABCDE represents Out1, Out2, Out3, Out4, and Out5 respectively.
File Name: MEITRACK VT310 User Guide Creator: Project: VT310 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2012-08-02 - 28 - of 30 External Documentation Remarks: Default time of the tracker is GMT, you can use this command to correct it to your local time. This command is for SMS tracking only. T=0, to turn off this function; T= [-32768,32767] to set time difference in minute to GMT.
File Name: MEITRACK VT310 User Guide Creator: Project: VT310 Sub Project: Revision: User Guide V7.
File Name: MEITRACK VT310 User Guide Creator: Project: VT310 Sub Project: Revision: User Guide V7.4 Creation Date: Update Date: Page: Confidential: Cavana Cheung 2010-08-26 2012-08-02 - 30 - of 30 External Documentation The SIM in VT310 has run out of credit Replace or top up the SIM card No SIM card Insert a working SIM card. Check in phone that the SIM can send SMS message SIM card has expired Check in phone that the SIM can send SMS message.