MEITRACK MT90G/MT90L User Guide MEITRACK MT90G/MT90L User Guide
MEITRACK MT90G/MT90L User Guide Change History File Name MEITRACK MT90G/MT90L User Guide Project MT90G/MT90L Creation Date 2019-07-26 Update Date Subproject User Guide Total Pages 18 Version V1.0 Confidential External Documentation Copyright © 2019 Meitrack Group All rights reserved.
MEITRACK MT90G/MT90L User Guide Contents 1 Copyright and Disclaimer........................................................................................................................................... - 4 2 Product Introduction ................................................................................................................................................. - 4 2.1 Product Features...........................................................................................................
MEITRACK MT90G/MT90L User Guide 1 Copyright and Disclaimer Copyright © 2019 MEITRACK. All rights reserved. and are trademarks that belong to Meitrack Group. The user manual may be changed without notice. Without prior written consent of Meitrack Group, this user manual, or any part thereof, may not be reproduced for any purpose whatsoever, or transmitted in any form, either electronically or mechanically, including photocopying and recording.
MEITRACK MT90G/MT90L User Guide generated. 2. For details about the man down alert, see section 7.2 "Setting the Man Down Alert – A29." 2.1.2 Power-Saving Mode This function is applicable for outdoor workers who need positioning at specific places instead of frequent positioning and require long battery life. Set the following items to enable the power-saving mode. 1. Enable the deep sleep mode. 2. Disable the 3D Shake Wake Up function. 3. Set the heartbeat packet reporting interval.
MEITRACK MT90G/MT90L User Guide Track by time interval Track by distance Track by mobile phone Speeding alert Cornering report 3.1.2 Emergency Alert SOS alert 3.1.
MEITRACK MT90G/MT90L User Guide GSM:850/900/1800/1900MHz WCDMA: MT90G_E:900/2100MHz MT90G_A:850/1900MHz MT90G_AU:850/900/2100MHz MT90G_JP:800/900/2100MHz MT90G:800/850/900/1900/2100MHz MT90L: MT90L_E: 2G GSM: 900/1800MHZ 3G WCDMA: B1/B8 4G FDD: B1/B3/B8/B20/B28 MT90L_A: 3G WCDMA: B2/B4/B5 4G FDD: B2/B4/B5/B12 Positioning accuracy 2.
MEITRACK MT90G/MT90L User Guide 5 About the MT90G/MT90L 5.1 Appearance No. Item Description 1 GPS indicator (blue) Indicates GPS and battery status. For details, see the section 5.2 "LED Indicator." 2 3 WCDMA/GSM indicator Indicates WCDMA/GSM status. For details, see the section 5.2 "LED (green) Indicator." Answer/Hang-up button When a call is coming in, press the button to answer the telephone. When one is calling, press the button to end the telephone conversation.
MEITRACK MT90G/MT90L User Guide will be turned on. When the device is turned on, press and hold down the button for 2 seconds. The device will make a sound, indicating that it will be turned off. In the sleep mode, press the button to wake the device up. Then the power indicator will blink for 10 seconds. 8 Micro USB port Used for charging the device, configuring parameters, and upgrading software.
MEITRACK MT90G/MT90L User Guide GPS Indicator (Blue) Indicator Status Description Steady on The device is charging. Blink (every 5 seconds) The device is in sleep mode. Blink (1 second on and 1 second off) The GPS is invalid or the device is initializing. Off The GPS is valid. Blink (0.3 seconds on and 0.3 seconds off) The battery power is low. WCDMA/GSM Indicator (Green) Indicator Status Description Steady on A call is coming in or a call is being made.
MEITRACK MT90G/MT90L User Guide 3. This operation is only for customers in China. 4. Install the battery. Insert the contacts side of the battery first and then gently push the battery cover downward until it locks into place. Then fasten the two screws on the back cover. 5. Charge the battery by USB cable. To charge the battery, connect the device to the wall charger or a computer through the USB cable.
MEITRACK MT90G/MT90L User Guide 6. Charge the battery by magnetic charging connector. Remove the USB rubber cover, plug the magnetic charging connector into the USB port, connect one side of USB cable to the magnetic conversion connector, and then attach the conversion connector to the magnetic charging connector. When the device is charging, the blue LED indicator for the conversion connector will steady on. Note: When the device is charged fully, please do not parallel pull the conversion connector out.
MEITRACK MT90G/MT90L User Guide Note: If an authorized phone number was set by SMS command A71, only this phone number can receive SMS reports. SMS example: Now,110727 02:48,V,16,23Km/h,61%,http://maps.google.com/maps?f=q&hl=en&q=22.540103,114.082329 The following table describes the SMS format: Parameter Description Remarks Now Indicates the current location. SMS header: indicates the current location or the alert type.
MEITRACK MT90G/MT90L User Guide Note: The default tracker password is 0000, which can be changed by using Meitrack Manager or SMS command. After the password is changed successfully by using an SMS command, only the authorized phone number can receive SMS reports. The common format of an SMS command is: Password,Command,Parameter. 7.2 Setting the Man Down Alert – A29 This command is used to enable or disable the man down alert. 1.
MEITRACK MT90G/MT90L User Guide Note: Phone number: Contains a maximum of 16 bytes. If no phone numbers are set, leave them blank. Phone numbers are empty by default. Phone number 1/2/3: SOS phone numbers. When you call the tracker by using these phone numbers, you will receive SMS notification about the location, geo-fence alert and low power alert. When you press the SOS button, the MT90G/MT90L will dial three authorized phone numbers in sequence.
MEITRACK MT90G/MT90L User Guide 7.5 Setting the Smart Sleep Mode – A73 This command is used to enable the smart sleep mode, prolonging standby time to 160 hours. SMS text: 0000,A73,Sleep level Send the text to the embedded SIM card phone number. The MT90G/MT90L automatically replies to the SMS: IMEI,A73,OK. It indicates that the sleep mode is set successfully. To enable the GPS Log or scheduled tracking function, disable the sleep mode.
MEITRACK MT90G/MT90L User Guide When SMS minute is 0, the time zone is GMT 0 (default time zone). When SMS minute is a value ranging from -32768 to 32767, set time zones. Set the China time zone value to 480. Example: Sending: 0000,B35,480 Reply: 353358017784062,B35,OK (The time zone is set to Beijing time successfully.) The digit is your MT90G/MT90L 's IMEI number.
MEITRACK MT90G/MT90L User Guide Track by time interval or distance. Query historical trips. Set polygonal geo-fences. Bind driver and vehicle information. View various reports. Send commands in batches. Support OTA updates. For details, see the MEITRACK GPS Tracking System MS03 User Guide. 10 Safety and Usage Instructions Use only Meitrack-approved accessories. Incompatible accessories may cause serious injuries or damages to your device.
FCC Warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generats, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.