Specifications

18
Delete Geo-fence
Alert
****,B06,X
0000,B06,1
Function: To delete a set of Geo fence alert.
SMS Response: TrackerID,B06,OK
X = 1 to 8 Waypoint.
Speeding Alert
****,B07,X
0000,B07,80
Function: To set a SMS alert when the tracker exceeds the preset speed limit.
SMS Response: TrackerID,B07,OK
X = Preset Speed limit.
X = 0, Turn OFF the alert.
X = 1~255, set the speed limit (in km/h).
Description
SMS Command
Example
Sleep Mode
****,B32,L
****,B32,1
Function: To set Sleep Mode
SMS Response: TrackerID,B32,OK
L = 0, Turn OFF the function L = 1, Level I L = 2, Level II
In Level I (1)
The GPS module will be working for first 3 minutes and shut down for 1 minute and working again for
another 3 minutes. It will repeat the cycle until Sleep Mode is turn OFF.
In Level II (2)
The GPS will be working for first 1 minute and shut down for 2 minutes and working again for another 1
minute. It will repeat the cycle until Sleep Mode is turn OFF.
Power Saving
****,B33,X
0000,B33,15
Function: To set Power Saving mode when the tracker is inactive or stationary for a period of time.
SMS Response: TrackerID,B33,OK
In Power Saving mode, GPS stops working, GSM enters standby mode and stop sending out message until it
is activated by message, movement or triggered by any buttons.
X = 0, to turn OFF the function.
X = 1~255, to turn ON Power Saving after tracker is inactive or stationary for a period of time (in minute).
Logging Interval
****,B34,X
0000,B34,5
Function: To set the logging interval for storing GPS data into tracker’s internal memory
SMS Response: TrackerID,B34,OK
X = 0, to turn OFF the function.
X = 1~65535, to set the interval (in seconds).
Time Zone Setting
(SMS Reporting)
****,B35,X
0000,B35,120