Specifications

17
Description
SMS Command
Example
Add New SMS
Event to Authorize
Phone Number
****,B02,P,E
0000,B02,1,17
Function: To add new SMS event report to an authorized phone number
P = 1, first authorized phone number.
P = 2, second authorized phone number.
P = 3, third authorized phone number.
E = Event Code.
SMS Response: TrackerID,B02,OK
NOTE: Please refer to 7. Event Codes Table for more details on Event Code.
Delete SMS Event
to Authorize
Phone Number
****,B03,P,E
0000,B03,1,17
Function: To delete SMS event report from an authorized phone number
P = 1, first authorized phone number.
P = 2, second authorized phone number.
P = 3, third authorized phone number.
E = Event Code. If no codes stipulated, all SMS event will be removed.
SMS Response: TrackerID,B03,OK
NOTE: Please refer to 7. Event Codes Table for more details on Event Code.
Geo-fence Alert
****,B05,W,LT,LO,R,I,O
0000,B05,1,22.91319,114.07988,1000,0,1
Function: To set a SMS alert when the tracker exits/enters a preset boundary.
SMS Response: TrackerID,B05,OK
W = 1 to 8 Waypoint.
LT = Latitude: Latitude in decimal degrees of a centre waypoint.
LO = Longitude: Longitude in decimal degrees of a centre waypoint.
R = Radius (in meters), Set the radius of the geo fence from the centre waypoint.
I = 0, Turn OFF the alert when tracker enters the preset boundary.
I = 1, Turn ON the alert when tracker enters the preset boundary.
O = 0, Turn OFF the alert when tracker exits the preset boundary.
O = 1, Turn ON the alert when tracker exits the preset boundary.