Specifications

* In any of the examples above, be sure to refer to the next section for module power requirements. In any redundant
scenario, if a power supply fails, the load on any remaining power supply must not exceed 8 amps.
2.4. Module Power Requirements
CHAPTER 2: INSTALLATION CHAPTER 2: INSTALLATION
MAXNET
®
II – MP3 Active / Passive Chassis – Installation & Operation Manual 2-3
Figure #2: Remote Powering Figure #3: Redundant Powering
Figure #4: Redundant Remote Powering
Module
Max Current (A) 8 0.29 0.52 0.46 0.29 0.52 0.03 0.14 0.47 0.52
MPAC / MPDC
MPRX-8 /
MPRX-16
MPRX2-8
MPRXRR-16 /
MPRXRR-8
MPRX-DC /
MPRX2-DC MPRX2-DC
MPRFA/B
QMP200
QMP1000
(< 22 dB Gain)
QMP1000
(> 22 dB Gain)