Specifications
8. Filezilla is now setup correctly. Leave it running in the background and open windows explorer and log into the
chassis web interface. For the next section you need to know your computers IP. If you are unsure what it is, open
windows command prompt. To access the command promt, Click ‘start’ and select ‘Run’. Type ‘cmd’ then ‘ok’) In the
command prompt window, type ‘ipcong’. Your IP should now be listed beside the ‘IP Address’ line.
9. Open windows explorer and connect to the chassis web GUI. Select the ‘Firmware’ tab. Leave ‘Firmware Type’
selected as ‘Application Image (image.bin). In the ‘Firmware Location’ section, select ‘Get from FTP server:’. In
the ‘Server:’ eld, enter the IP of your computer. (Note* Your computer needs to be connected directly to, or on the
same network as the chassis) In the ‘Path:’ eld, enter the full name of the .bin le you are upgrading to. Check the
‘FTP server requires login:’. In the ‘Username:’ eld, enter the exact name of the folder created in step one. When
all this is done, press the ‘Upload’ button.
MAXNET
®
II – MP3 Active / Passive Chassis – Installation & Operation Manual 6-3
CHAPTER 6: FTP SERVER FIRMWARE LOAD INSTRUCTIONSCHAPTER 6: FTP SERVER FIRMWARE LOAD INSTRUCTIONS