Technical information

Menu: Network
In this submenu the network configuration parameters related to the network
interfaces can be changed. The submenus can be selected with the arrow keys and the
“OK” button:
As soon as an IP address is configured, additional network configuration can be done
via network connection with TELNET, SSH or the WEB interface. Ask your network
administrator for network specific parameters. Every change of the network
parameters will restart the NTP. All network specific parameters will be saved on the
flash disk (/mnt/flash/config/global_configuration) and will be reloaded after reboot.
It is highly recommended not to edit this file manually but to configure the
parameters via the several configuration interfaces (HTTP, CLI or SNMP). If this file
is not present, an empty file will be created. See Appendix for the default settings of
this file.
38
Reference Time -> Network <-
Time Service System
-> Global Cfg. <- Services
Interfaces
OK
OK
->Hostname<- Namesrv. Netw.LED
Domain Syslog
OK
-> Ipv4 Parameter <- Link Mode
Ipv6 Parameter
OK
>SSH:on < TELN:on IPv6:on HTTPS:on
FTP:on SNMP:off HTTP:on NETB:off
Global Cfg. Services
-> Interfaces <-
Global Cfg. -> Services <-
Interfaces