Technical information

Programmable pulse (Option)

At the male connector type VG64 there are optionally three programmable TTL

outputs (Prog Pulse 1-3), which are arbitrarily programmable.

SETUP POUT X

This menu is used for configuration of the pulse outputs. There are three pulse outputs

available (POUT 1-3).

Programmable Pulses Output

Out1:TIMER Out2:CYCLIC Out3:PASSIV

With the arrow key right or OK Button the parameters of each programmable pulse

output can be set:

--> Programmable Pulses Output 1 <--

Programmable Pulses Output 2

Programmable Pulses Output 3

Each programmable pulse output has its own Mode to be set. With the arrow keys

up and down the mode can be selected:

---> POUT1 Mode PASSIV <---

POUT1 Mode TIMER

POUT1 Mode SINGLE

POUT1 Mode CYCLIC

POUT1 Mode PPS

POUT1 Mode PPM

POUT1 Mode PPH

Mode

This field selects the mode of operation of an output. Possible modes are PASSIV,

TIMER, SINGLE, CYCLIC, PPS, PPM and PPH.