Technical information

Info GPS
GPS Status & Version
This first menu will monitor the current state („sync“ or „not sync“). The next line
will reflect the firmware version, the serial number of the internal GPS and the type of
the integrated oscillator.
GPS Receiver Position
This menu shows the current receiver position. The „OK“ key lets the user select
one of three formats. The default format is geographic latitude, longitude and altitude
with latitude and longitude displayed in degrees, minutes and seconds. The next
format is geographic too, with latitude and longitude displayed in degrees with
fractions of degrees. The third format displays the receiver position in earth centered,
earth fixed coordinates (ECEF coordinates). The first two formats are shown below:
28
Setup GPS Setup Outputs
-> Info GPS <-
OK
->Status & Version<- GPS Satellites
GPS Position
Reference Clock GPS State: SYNC
GPS170 v1.17 S/N: 024000000000 OCXO HQ
GPS RECEIVER POSITION
LAT: 51.1234 LON:10.2111 ALT: 120m