User`s guide

81
To define CSV attributes:
1. In the CSV Attribute Tool dialog, select the object type from the Object Type
drop-down list. If the pre-defined (IX) or user-defined (UP) process object type
is selected, select the sub type from the Sub Type drop-down list.
2. In the Sub Type drop-down list, either select the common attributes or the
process object type specific attributes. See Fig. 3.1.2.2.-2
3. On clicking the CSV Attributes tab the following two lists are displayed: All
Attributes and Selected CSV Attributes. The All Attributes list contains all
configurable attribute names, which are available for the current object type. The
Selected CSV Attributes list contains attribute names, which are selected from
the All Attributes list. By selecting Edit menu, it is possible to edit the Selected
CSV Attributes list's attributes. See Fig. 3.1.2.2.-2.
4. There are three buttons between Selected CSV Attributes and All Attributes lists:
left arrow, Reset and Save button. See Fig. 3.1.2.2.-2.
*
The left arrow button is enabled when one attribute is selected from the All
Attributes list. Click this button, if you want to copy the selected attributes to
the Selected Attributes list.
*
Click the Reset button to select and move the configurable attributes to the
Selected CSV Attributes list.
*
Click the Save button to save all selected attribute names of the object types
to a file. When opening the CSV Attribute Tool again, the CSV attributes are
read from this file. Attribute names are saved during the last export session by
default, to the CSV_ATTRIBUTES.INI file. See Fig. 3.1.2.2.-2.
MicroSCADA Pro
Installation and Administration Manual
SYS 600 9.2SYS 600 9.2
1MRS756115