User`s guide

75
3. System administration
3.1. Transferr ing objects
The following common functionality is provided by the Export/Import tool:
*
Recognizing of all the application objects from the selected MicroSCADA Pro
application.
*
Defining the common options for the exported and imported application objects.
*
Exporting and importing application objects.
The common options for the exported and imported data are provided in the Export
and Import field. The application objects to be handled are listed in the Applications
Objects list. The progress of operation is indicated by using the progress indicator
and the status bar field. The user can operate by clicking the appropriate buttons in
the tool. See Fig. 3.1.2.-1
The Export/Import tool can also act as stand-alone tool and be consequently
accessed directly through Tool Manager.
Recognizing application objects
During the start-up of the tool, the list of MicroSCADA Pro applications is read.
The application, where the Export/Import tool has been started, is used as a default
item.
The list of object types contains the following application objects, which are
indicated with letters:
P Process Object Groups
IX Process Objects
X Scale Objects
D Data Objects
C Command Procedures
T Time Channels
A Event Channels
UP User Defined Process Objects
F Free Type Objects
H Event Handling Objects
It is also possible to select All Object Types from the Object Type drop-down list.
When All Object Types is selected, the Export/Import tool operates with all the
application objects found from the selected application.
Export/Import Tool composition
The Export/Import Tool is composed of:
*
a menu bar
*
a tabbed page containing search conditions
MicroSCADA Pro
Installation and Administration Manual
SYS 600 9.2SYS 600 9.2
1MRS756115