User`s guide

4. Close the tool, re-open it, and open the active configuration.
5. Under Program/User_Defined you will find preconfigured file for printer.
6. Edit it (remove semicolons) to fit your purpose.
7. Stop the running MicroSCADA and re-start MicroSCADA.
A070738
Fig. 2.7.1.3.-2 System configuration tool
A070739
Fig. 2.7.1.3.-3 SCIL editor
2.7.2. Installing adapter cards
To install an adapter card, mount the alarm card used into a free PCI expansion slot
in the base system computer. A PCI card selects the necessary I/O port addresses
automatically.
To use these cards, settings to SYS_BASCON.COM must be done:
72
SYS 600 9.2SYS 600 9.2
MicroSCADA Pro
Installation and Administration Manual
1MRS756115