User`s guide

71
LI The number of the selected line
IU 1
MI, MS System message handling, see
AL, AS 0 (the printer reservation is handled automatically by the
base system)
PT Printer type 1 = character-based, black-and-white 2 =
"transparent" 3 = pixel-based, black-and-white 4 =
character-based, black-and-white, graphical characters
replaced by printer characters 6 = Facit 4544 7 = pixel-
based, color
For more information on the attributes of the PRI object, refer to the System Objects
manual. When a base system is started, its default application (the application
created first in SYS_BASCON.COM) sends a message to the printers (form feed).
Therefore, make sure that these applications are defined in the NETs.
Using System Configuration Tool for setting printer
A070737
Fig. 2.7.1.3.-1 Base configuration system
Create an outline of your system configuration or a table that includes the following
information:
*
The node numbers and station addresses of the base system and NETs.
*
Application numbers and possible names.
*
NET line numbers.
*
Station numbers (in NET and in the base system if different) and station
addresses (slave numbers) of all devices.
Use System Configuration Tool and do next steps:
1. Define a configuration, which at least contains the ASCII Printer communication
line.
2. Specify the ASCII Printer line specific attributes IU and SD.
3. Save the active configuration.
MicroSCADA Pro
Installation and Administration Manual
SYS 600 9.2SYS 600 9.2
1MRS756115