User`s guide

29
Administration Tools: In addition to all the familiar Windows Server
administration tools, Terminal Server adds the Terminal Server License Manager,
Terminal Server Client Creator, Terminal Server Client Connection Configuration
and Terminal Server Administration tools for managing the client sessions. There
are two new objects, Session and User, which are also added to the Performance
Monitor to allow tuning of the server in a multiuser environment.
2.3.2. Terminal Server system requirements
The Terminal Server system requirements are as follows.
Operating system:
*
Microsoft Windows 2000 Server or
*
Microsoft Windows Server 2003 Standard Edition
Base Requirements:
*
32-bit x86 microprocessor (such as Intel PentiumIII or higher)
*
1024x768 or higher resolution monitor, 256 colors
*
One or more hard disks, with 1GB minimum of free hard disk space
*
256 MB of RAM, plus 10 MB for each typical user who is connecting
*
Transmission Control Protocol/Internet Protocol (TCP/IP)
*
CD-ROM drive or network access for installation
Processor and Memory Requirements:
Processor and memory requirements scale linearly up to four processors. The
maximum memory supported is 4 GB.
Other Peripherals:
Hard disk throughput also affects the performance of the system. For the highest
disk performance, consider using a SCSI RAID controller. The RAID (Redundant
Array of Independent Disks) controllers place data on multiple disk drives
automatically and can therefore increase disk performance and improve data
reliability.
Although the Remote Desktop Protocol used with Terminal Server causes negligible
network load, a high-performance network interface card (NIC) is recommended.
This is particularly important, if many users require access to data stored on network
servers or run client/server applications.
If a multiport asynchronous communications adapter is installed for supporting dial-
in users, be sure to use an intelligent (microprocessor-based) adapter to reduce
interrupt overhead and increase throughput.
Client System:
MicroSCADA Pro
Installation and Administration Manual
SYS 600 9.2SYS 600 9.2
1MRS756115