User`s guide

27
SA = 232)
#CREATE NOD32:B = %NOD
#CREATE NOD:V = LIST(- ;Node for LAN frontend or SYS
LI = 1,-
NN = "System2",-
DI = 10,-
DT = 30,-
SA = 230)
#CREATE NOD30:B = %NOD
2.2.5. Verifying the LAN communication
Use the ping utility to test the connectivity on the LAN and determine if a host is
available and active. The syntax is: ping host where 'host' is the computer's IP
address or node name on the network. If the computer responds, a message is
produced with some diagnostic information.
A070514
Fig. 2.2.5.-1 Testing LAN Connectivity
Example:
Ping 192.10.0.210
Reply from 192.10.0.210: bytes = 32 time < 10ms TTL 255
The typical reply time is below 10ms. If the reply time exceeds 50 ms on normal 10/
100Mb/s Wired or Fibre Optic Network, it is recommended to check the LAN
communication equipment.
2.3. Installing workplaces
2.3.1. Installing Terminal Services
Terminal Services is a component of Microsoft Windows (both server and client
versions) that allows a user to access applications and data stored on a remote
computer over a network. This feature is needed to be able to open
MicroSCADA Pro FrameWindow – type pictures on workstations.
MicroSCADA Pro
Installation and Administration Manual
SYS 600 9.2SYS 600 9.2
1MRS756115