User`s guide

1. Restart the computer to remove possible memory resident data.

2. Logon as a user with administrator rights.

3. Double-click the installation icon to start the installation. It is recommended to

install using Add/Remove Programs from the Control Panel.

4. In the Product Installation dialog the software packages are listed, see

Fig. 2.1.4.-2. Select the software packages that you want to install by selecting

the appropriate check box.

A051494

Fig. 2.1.4.-2 Selecting products to be installed.

Program contains MicroSCADA main program and must be installed in SYS

PC.

Workstation monitor opening application (mons) is installed for VS and X Monitor

types

Documentation will install documents

In practise, all three packages are installed in the SYS PC. This will allow

opening VS monitors locally on SYS PC and reading documents. Workstation

package is installed on workstation PC if VS/X -type monitors are used.

5. Select the drive in which the application is to be installed. The installation

program suggests a destination drive for the MicroSCADA Pro installation. If

MicroSCADA Pro has been installed before, the destination drive used in the

previous installation is shown as a default drive. Otherwise, the default drive is

C. To select another drive, click Change Drive and choose the drive.

SYS 600 9.2SYS 600 9.2

MicroSCADA Pro

Installation and Administration Manual

1MRS756115