User`s guide

147
When "ON_COMMAND_EXPANSION" is set, the expansion of macros is done as
in revision 8.1, that is, before the line is interpreted.
4.2. LIB 5xx
Language translation
When LIB 5xx is updated there might be new attributes in language text files. This
means that those attributes has to be added and translated to corresponding localized
language files.
Revision compatibility switches
If only base system is updated and LIB 5xx is from earlier revision, some
malfunction may occur in LIB 5xx application. This situation can be handled by
means of revision compatibility switches. In this chapter the relation of revision
compatibility switches having influence to LIB 5xx applications is explained. For
more information about revision compatibility switches refer to Section 4.1. Base
system.
NO_ALIAS_CHECKING
If SCIL_VARIABLE_ALIASING_ERROR is generated turn this switch
DONT_RECALCULATE_AL_AFTER_ALARM_BLOCKING
If base system is 8.4.4 or newer and LIB5xx application is revision 4.0.3 or older
each switch device control action generated an alarm. This can be avoided by
turning this switch on.
Daylight saving time
When LIB 500 is updated to revision 4.0.4 or latter a new daylight saving time
mechanism is taken into use. Command procedures (BGU_SUMMER,
BGU_WINTER) and related time channels handling the daylight saving time in a
"old" way are disabled. A back up of the command procedures is stored to files
PICT/BGU_SUMMER.CIN and PICT/WINTER_SUMMER.CIN
MicroSCADA Pro
Installation and Administration Manual
SYS 600 9.2SYS 600 9.2
1MRS756115