User`s guide

2.1.2. Software requirements
The MicroSCADA Pro system supports the following operating systems:
*
Microsoft Windows 2000 Professional
*
Windows 2000 Server
*
Microsoft Windows XP Professional or
*
Microsoft Server 2003 Standard Edition.
Other server versions might be compatible with MicroSCADA; however those are
not supported by this software.
For more information about operating systems, refer to Microsoft documentation.
The user documentation is available as PDF files on
www.abb.com/microscada, both as part of the product package and as separate files.
Adobe Acrobat Reader is not supplied with MicroSCADA Pro, but can
be downloaded for free from
http://www.adobe.com/products/acrobat/readstep2.html
MicroSCADA Pro supports only the 32-bit version of the operating system.
Additional software
The Hummingbird eXceed version 7.0 or newer is required as an X-server on the
workstation computer whenever the system includes distributed HSI (Human
System Interface), and uses MicroSCADA X and VS Remote monitor types (Classic
workplaces).
2.1.3. Installation procedure
The MicroSCADA Pro base system installation procedure:
*
Install the network adapter card if a local area network is to be used.
*
Install the operating system.
*
Install corresponding device drivers and protocols for the local area network.
*
Install the PC cards used by MicroSCADA Pro: PC-NET cards, I/O units, LON
adapter cards and radio clock cards.
*
Install the X-server software, Exceed, if MicroSCADA Pro X-monitors or VS
remote monitors are shown on the base system computer display.
*
Install the MicroSCADA Pro base product software.
*
Install optional products, if used: LIB 500 and LIB 5xx.
*
Add and prepare applications.
*
Configure, test and start the possible drivers.
14
SYS 600 9.2SYS 600 9.2
MicroSCADA Pro
Installation and Administration Manual
1MRS756115